| java.lang.Object | ||
| ↳ | com.datalogic.device.configuration.PropertyGroup | |
| ↳ | com.datalogic.decode.configuration.Interleaved25 | |
Interleaved25 is the class that configures the Interleaved 2/5
Symbology.
| Fields | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Length1 | Length1 is one of the two configurable label lengths. |
||||||||||
| Length2 | Length2 is one of the two configurable label lengths. |
||||||||||
| aggressiveness | aggressiveness control the aggressiveness for the Interleaved 2/5 symbology. |
||||||||||
| enable | enable enables or disables the symbology. |
||||||||||
| enableChecksum | enableChecksum requires the use of checksum characters to
verify a barcode. |
||||||||||
| itf14 | itf14 enables or disables the ITF14 symbology. |
||||||||||
| lengthMode | lengthMode is the LengthControlMode selected for a label. |
||||||||||
| sendChecksum | sendChecksum includes the checksum in the label transmission
(if checksum is required with enableChecksum). |
||||||||||
| userID | userID specifies the symbology identifier (if any). |
||||||||||
| Public Constructors | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
This is the constructor of Interleaved25.
| |||||||||||
|
[Expand]
Inherited Methods | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
From class
com.datalogic.device.configuration.PropertyGroup
| |||||||||||
|
From class
java.lang.Object
| |||||||||||
Length1 is one of the two configurable label lengths. It can be used
as a single fixed accepted length, when lengthMode is set to ONE_FIXED.
When TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label.
It can also represent the minor or major length value whenever RANGE is selected.
If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the
biggest accepted length will be used.
Note: Length1 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document
in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the
device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader,
environmental light, etc...
Length2 is one of the two configurable label lengths.
When TWO_FIXED is enabled, its value is one of the two possible accepted fixed lengths for a specific label.
It can also represent the minor or major length value whenever RANGE is selected.
If is set below the accepted minimum, the smallest accepted length will be used; instead it the set value exceed the maximum value, the
biggest accepted length will be used.
Note: Length2 allowed range of values is somehow related to the nature of the barcode (linear vs 2D) but it's not intended to document
in any way the scanner capabilities. An accepted minimum value and an accepted maximum value are introduced only to simplify length management in the
device Scanner settings app. The chance to read a barcode depends on it's printed quality, resolution, overall size, distance from the reader,
environmental light, etc...
aggressiveness control the aggressiveness for the Interleaved 2/5 symbology.
enableChecksum requires the use of checksum characters to
verify a barcode.
itf14 enables or disables the ITF14 symbology.
It could be used to include a GTIN.
It always checks and transmits the checksum character.
lengthMode is the LengthControlMode selected for a label.
Selects the length control mode.
sendChecksum includes the checksum in the label transmission
(if checksum is required with enableChecksum).
userID specifies the symbology identifier (if any).
The symbology identifier is sent with the label when the
global decode property sendCodeId is set to
USERDEFINED_IDENTIFIER_BEFORE_LABEL or USERDEFINED_IDENTIFIER_AFTER_LABEL.
This is the constructor of Interleaved25. All symbology options are initialized by editor.
| editor | A PropertyGetter used to load the current barcode family.
|
|---|