Pose manager
The Pose Manager allows the system to detect the physical orientation or position (pose) of the device using its internal sensors (like gravity vectors). It can trigger specific device configuration changes automatically depending on whether the device enters or exits a predefined pose.
This is highly useful for hands-free scanning, auto-triggering the scanner when a device is pointed downward/upward, or changing key behaviors dynamically based on how the device is held.
This feature is not available on all devices.
A pose is a specific physical orientation or position of the device in space, such as lying face down on a table, held vertically, or tilted in a vehicle cradle. Each pose is defined by a unique name, a target gravity vector (X, Y, Z) measured by the accelerometer, and a detection enabled switch that turns its monitoring on or off. For both entering the pose (In Pose) and leaving it (Out of Pose), you set a delta angle (the angular tolerance around the vector), a stabilization time (how long the device must stay in or out of the boundary before the change is registered), activation options (the conditions under which the rule is monitored) and execution options (the action triggered).
To configure a pose, tap the + icon in the bottom-right corner of the Pose management screen.
Set the following parameters:
Name
The unique identifier (String) assigned to a specific custom pose configuration.
Gravity vector
The target 3D spatial orientation coordinates (X, Y, Z) measured by the device’s built-in accelerometer. This vector defines the exact physical angle or resting position (e.g., face down on a table, tilted in a vehicle cradle, or held vertically) that constitutes the target pose
Detection enabled
Activates or suspends the background tracking for this specific pose rule. When disabled, the device ignores sensor inputs for this vector, preserving battery life and skipping any associated actions.
In Pose Settings
This block controls how the device behaves at the exact moment it transitions into the defined spatial orientation.
Delta angle (°)
The permissible margin of error (measured in degrees) around the target Gravity Vector. For example, if your gravity vector is a strict flat surface and your Delta Angle is set to 10°, the device will successfully identify itself as being "In Pose" as long as it rests within a 10-degree tilt variance of that target.
Stabilization time (ms)
The debounce delay duration (in milliseconds) the device must continuously spend inside the target vector and delta angle before officially triggering an action. This prevents accidental triggers caused by rapid hand movements, bumps, or brief vibrations.
Activation Options
The rules governing when or under what conditions this "In Pose" configuration should be monitored or enforced. This can include gating the rule by foreground application packages, active user profiles, or specific power states.
Execution Options
The specific programmatic or hardware action triggered when the device stabilizes "In Pose". Common use cases include turning off the barcode scanner beam when face-down, dimming the screen brightness in a cradle, or launching an intent to open a specific application picker.
Out of Pose Settings
This block controls how the device behaves the moment it exits the defined spatial orientation.
Delta angle (°)
The degree threshold required to confirm the device has officially broken out of its resting pose. Setting a slightly different exit delta angle provides "hysteresis," which stops the device from rapidly toggling the event on and off if it is sitting right on the edge of the physical boundary.
Stabilization time (ms)
The continuous time threshold (in milliseconds) the device must remain outside the pose's boundary before the system registers it as officially exited. This ensures normal usage shifts do not false-trigger the exit routine prematurely.
Activation Options
The structural constraints determining if the exit routine's monitoring framework is active. This ensures that the system knows whether to continue tracking the "Out of Pose" transitions under the current device state, user profile, or background activity limits.
Execution Options
The automated action or reset routine executed when the device moves out of the pose. For example, when picking a device up off a table (exiting the pose), the execution option might wake the screen, re-enable the hardware scan trigger, or change the scanner to wide-angle targeting mode.