Configuration Example

Overview

This example edits the Datalogic OEMConfig profile created in OEMConfig to make three common changes:

• Set the battery charging profile to Capacity only preference, to charge the battery to its full capacity.
• Disable the scanner beep on a successful read, using the good read audio mode.
• Remove the default [LF] (line feed) label suffix, so that no character is sent after the scanned data.

Procedure

SOTI MobiControl

Open the OEMConfig configuration

1. Sign in to the SOTI MobiControl web console.
2. Navigate to Policies > Profiles.
3. Select the OEMConfig profile.
4. Open the Configurations tab.
5. Select the OEM Config configuration.

Set the battery charging profile

1. Expand Power Settings.
2. Expand Battery Charging.
3. Set Battery charging profile to Capacity only preference.

Disable the scanner beep

1. Expand Scanner Settings.
2. Expand Notification.
3. Set Good read audio mode to None.

Remove the label suffix

1. Under Scanner Settings, expand Formatting.
2. Clear the Label suffix field, deleting [LF].

Save and deploy the profile

1. Select Save.
2. Select Save and Assign if the profile isn't already assigned, and select the device group.
3. Verify the changes on a device: scan a barcode, and check that no beep sounds and no line feed is added after the data.

Microsoft Intune

Open the OEMConfig profile

1. Sign in to the Microsoft Intune admin center.
2. Select Devices.
3. Select Manage devices.
4. Select Configuration.
5. Select the Datalogic OEMConfig profile.
6. Select Properties.
7. Next to Configuration settings, select Edit.
8. Select Configuration designer.

Set the battery charging profile

1. Select Add setting.
2. Expand Power Settings.
3. Expand Battery Charging.
4. Select Battery charging profile.
5. Select OK.
6. Set Battery charging profile to Capacity only preference.

Disable the scanner beep

1. Select Add setting.
2. Expand Scanner Settings.
3. Expand Notification.
4. Select Good read audio mode.
5. Select OK.
6. Set Good read audio mode to None.

Remove the label suffix

1. Select Add setting.
2. Expand Scanner Settings.
3. Expand Formatting.
4. Select Label suffix.
5. Select OK.
6. Clear the Label suffix value, deleting [LF].

Save the profile

1. Select Review + save.
2. Select Save.
3. Verify the changes on a device: scan a barcode, and check that no beep sounds and no line feed is added after the data.

SureMDM

Open the OEMConfig profile

1. Sign in to the SureMDM web console.
2. Navigate to Profiles.
3. Select the Android tab.
4. Select the OEMConfig profile.
5. Select Edit.

Set the battery charging profile

1. Expand Power Settings.
2. Expand Battery Charging.
3. Set Battery charging profile to Capacity only preference.

Disable the scanner beep

1. Expand Scanner Settings.
2. Expand Notification.
3. Set Good read audio mode to None.

Remove the label suffix

1. Under Scanner Settings, expand Formatting.
2. Clear the Label suffix field, deleting [LF].

Save and apply the profile

1. Select Save.
2. Return to the Home tab.
3. Select the target device or devices.
4. Select Apply.
5. Select the OEMConfig profile.
6. Select Apply.
7. Verify the changes on a device: scan a barcode, and check that no beep sounds and no line feed is added after the data.

Workspace ONEWorkspace ONE (formerly AirWatch)

Open the OEMConfig application configuration

1. Sign in to the Workspace ONE UEM console.
2. Navigate to Resources > Apps > Native.
3. Select the Public tab.
4. Select Datalogic OEMConfig.
5. Select Assign.
6. Select the assignment for your devices.
7. Select Edit.
8. Open the Application Configuration tab.

Set the battery charging profile

1. Expand Power Settings.
2. Expand Battery Charging.
3. Set Battery charging profile to Capacity only preference.

Disable the scanner beep

1. Expand Scanner Settings.
2. Expand Notification.
3. Set Good read audio mode to None.

Remove the label suffix

1. Under Scanner Settings, expand Formatting.
2. Clear the Label suffix field, deleting [LF].

Publish the configuration

1. Select Save & Publish.
2. Review the assigned devices.
3. Select Publish.
4. Verify the changes on a device: scan a barcode, and check that no beep sounds and no line feed is added after the data.