Scan2Deploy Studio 1.8.4 is now available. It includes a minor update to device availability. Read below for more details.

Downloads are available in the Releases section on the Scan2Deploy Studio Github page.

Enhancements​

• Added Memor 11 device selection support

Corrected Defects​

• Managed configuration
  • Changes to the following configuration items will now be accepted:
    • "Allow all sites to be browsed"
    • "Enable device access to settings and exit"

Enhancements​

• Added support for configOnClaim property for USB-OEM Scale.
• Added new Information, Health and Statistics fields to align with VAF Specification for Fresco units.

Corrected defects​

• Corrected an issue causing the weight to always be cleared when clicking the Zero Scale button in JavaPOSTest.

Corrected Defects​

• Web Storage and IndexedDB APIs
  • The browser now supports access to these APIs when JavaScript is enabled. With previous versions, any web page that tried to use these APIs from JavaScript would fail to load properly.

Enhancements​

• Added support for Dock management settings:
  • Firmware update policy
  • Cradle unlock policy
  • Cradle unlock key policy
  • Cradle unlock notification policy
  • Cradle failure policy
• Enhanced feedback to Scan2Deploy Agent
• Added support to new symbology settings:
  • Code 128
    • Extended ASCII
    • Character set mode
  • Han Xin
  • QR Code
    • QR Code absolute grid
    • QR Code Mirror
  • Datamatrix
    • DMRE
• Added support for new scanner settings:
  • Good read timeout
  • Enhance DoF
  • Image decode timeout
  • check GS1 Format
  • Use Human Readable GS1 Format
• Added support for Input Selection:
  • Input type
  • Preview Display Mode
  • Manual camera display settings
• Added support for new Wi-Fi settings:
  • MAC randomization
  • No internet expected
  • Retry times
  • Recalculation interval
  • Beacon period

Corrected Defects​

• Corrected defects for Launching Activities
• Minor bug fixes

New Features​

• Locked down browsing
  • You can now allow pages to browse to any web site (regardless of defined domains).
• Configuration.
  • Settings can be exported to a file, which can then be imported on another device using Scan2Deploy Studio (or EMM). (Available on newer firmware images. See table here.)
  • Resetting settings to defaults is now protected with a confirmation dialog.
• Favorites Screen appearance
  • The text color for icon labels can now be configured.

Datalogic Android SDK 1.33 is now available. The SDK add-on version supports Android API levels up to 30 (Android 11).

You can access the documentation here.

Enhancements​

• added GOOD_READ_TIMEOUT property for Barcode and Configuration Manager interfaces
• added WIFI_MAC_RANDOMIZATION and WIFI_NO_INTERNET_EXPECTED properties for setting the Wifi Module
• added WIFI_ROAMING_RETRY_TIMES, WIFI_ROAMING_RECALCULATION_INTERVAL and WIFI_ROAMING_BEACON_PERIOD properties for setting the Wifi Roaming
• added capability to setup the Cameras as input scanning modules:
  • new Barcode Manager methods to setup the Input Device to be used for scanning (Cameras or Scan Engine) and to retrieve the supported Input Devices and the current Input Device in use;
  • new Camera Input Device object to setup the image capture options;
  • INPUT_TYPE and PREVIEW_DISPLAY_MODE to configure the feature through the Configuration Manager interface;
• improved documentation for setting up the persistence of a configuration profile through the Profile Manager
• added broadcast, startactivity and startservice intent to perform device firmware upgrade
• addded method getSlotIndex() to retrieve the index of the slot where the device is inserted into the Cradle
• addded method getInsertionCount() to retrieve the number of insertion into a slot of the Cradle
• extended Failures for supporting the JT22 Cradle
• added support to CODE128_EXTENDED_ASCII and CODE128_CHARACTER_SET_MODE to Configuration Manager interface

New Features​

• Locked down operation
  • You can now allow apps to launch any other app, even if it is not displayed on the Home Screen.
  • Launching apps from the Home Screen can now be protected with a password.
• Configuration.
  • Settings can now be exported to a file, which can then be imported on another device using Scan2Deploy Studio (or EMM). (Available on newer firmware images. See table here.)
  • Resetting settings to defaults is now protected with a confirmation dialog.
• Home Screen appearance
  • A title bar may be added to the Home Screen
    • The title can include device variables, such as serial number and device name.
    • The appearance (text size, foreground/background color) of the title bar can be configured.
  • The text color for icon labels can now be configured.

The MAUI / Xamarin SDK v1.32 is now ready to download, and has been upgraded to provide support for the .NET MAUI framework as well as the Xamarin platform. This version also upgrades the SDK to feature parity with v1.32 of the Datalogic Android SDK. You can access the documentation here. The online API documentation is available here. And you can see the package on NuGet here.

Scan2Deploy Studio 1.8.3 is now available. It includes some bug fixes. Read below for more details.

Downloads are available in the Releases section on the Scan2Deploy Studio Github page.

Corrected Defects​

• Fixed an issue that caused the Launcher password to become corrupted when importing a profile.
• Fixed an issue that caused the drop down list of some settings not to be shown.