|
Code Parameter |
Description |
I.D.# |
C/C++ Define |
Accept. Input |
Defaults |
Scanner Type |
||||
|
Min |
Max |
Factory |
Laser |
2D Imager |
Lorax |
|||||
|
|
Enter 1 for On and 0 for Off |
|||||||||
|
Enable |
Enables/ disables the Pharmacode 39 (Code 32) symbology. |
0110 |
#define PHARMA39_ENABLE |
On or Off |
Off |
On |
Off |
√ |
√ |
√ |
|
Send Checksum |
Instructs the terminal to include the checksum in the label transmission. |
0112 |
#define PHARMA39_SEND_CHECK |
On or Off |
Off |
Off |
Off |
√ |
√ |
√ |
|
Send Start/ Stop |
Instructs terminals to prefix a Pharmacode 39 label with an “A” prior to transmission. |
0113 |
#define PHARMA39_SEND_START |
On or Off |
Off |
On |
Off |
√ |
√ |
√ |
|
User ID |
Specifies the symbology identifier (if any) that is sent by the decoder when parameter Send Code ID (Index 0025) is set to 3. ASCII code zero (null) is used to indicate that an identifier is not to be sent for the symbology. |
0127 |
#define PHARMA39_USER_ID |
Any single ASCII character (00 = Off) |
‘Y’ |
‘Y’ |
‘Y’ |
√ |
√ |
√ |