|
Code Parameter |
Description |
I.D.# |
C/C++ Define |
Accept. Input |
Defaults |
Scanner Type |
|||||||
|
Min |
Max |
Factory |
Laser |
2D Imager |
Lorax |
||||||||
|
|
Enter 1 for On and 0 for Off |
||||||||||||
|
Maxicode Enable |
Enables/ disables the Maxicode symbology. |
0B08 |
#define MAXICODE_ENABLE |
On or Off |
Off |
On |
Off |
|
√ |
|
|||
|
Minimum Label Length |
Set the minimum bar code label length to be less than or equal to maximum label length. |
0B24 |
#define MAXICODE_MIN_LENGTH |
1-138 |
1 |
138 |
1 |
|
√ |
|
|||
|
Maxicode Maximum |
This feature specifies the maximum allowable length of a label. The length includes check and data characters, if applicable. Maximum Label Length should be greater than or equal to Minimum Label Length. |
0B25 |
#define MAXICODE_MAX_LENGTH |
1-138 |
1 |
138 |
138 |
|
√ |
|
|||
|
Maxicode User ID |
Specifies the symbology identifier (if any) that is sent when parameter Send Code ID (Index 0025) is set to 3. ASCII code zero (null) is used to indicate that an identifier is not to be sent for the symbology. |
0B27 |
#define MAXICODE_USER_ID |
Any single ASCII character (00 = Off) |
‘W’ |
‘W’ |
‘W’ |
|
√ |
|
|||