|
Code Parameter |
Description |
I.D.# |
C/C++ Define |
Accept. Input |
Defaults |
Scanner Type |
||||
|
Min |
Max |
Factory |
Laser |
2D Imager |
Lorax |
|||||
|
|
Enter 1 for On and 0 for Off |
|||||||||
|
Enable |
Enables/disables the EAN-8 symbology. |
0518 |
#define EAN8_ENABLE |
On or Off |
Off |
On |
On |
√ |
√ |
√ |
|
Enable Aggressive Decoding |
Enables more aggressive decoding algorithms to be used in order to scan hard to read labels. |
0519 |
#define EAN8_LEVEL |
On or Off |
Off |
On |
Off |
√ |
√ |
|
|
Send Check Digit |
Instructs the terminal to include the check digit in the label transmission. |
051A |
#define EAN8_SEND_CHECK |
On or Off |
Off |
On |
Off |
√ |
√ |
√ |
|
Convert EAN-8 to EAN-13 |
Instructs the decoder to expand EAN-8 labels to their EAN-13 equivalents. |
051B |
#define EAN8_TO_EAN13 |
On or Off |
Off |
On |
Off |
√ |
√ |
√ |
|
Read Verification |
Sets the number of times a label must be read before it is transmitted. |
0526 |
#define EAN8_REDUNDANCY |
01 - 04 |
01 |
02 |
01 |
√ |
|
|
|
User ID |
Specifies the symbology identifier (if any) that is sent by the decoder when parameter Send Code ID (Index 0025) is set to 3. ASCII code zero (null) is used to indicate that an identifier is not to be sent for the symbology. |
0527 |
#define EAN8_USER_ID |
Any single ASCII character (00 = Off)
|
‘G’ |
‘G’ |
‘G’ |
√ |
√ |
√ |