|
Code Parameter |
Description |
I.D.# |
C/C++ Define |
Accept. Input |
Defaults |
Scanner Type |
||||
|
Min |
Max |
Factory |
Laser |
2D Imager |
Lorax |
|||||
|
|
Enter 1 for On and 0 for Off |
|||||||||
|
Datamatrix Enable |
Enables/ disables the Datamatrix symbology. |
0B00 |
#define DATAMATRIX_ENABLE |
On or Off |
Off |
On |
On |
|
√ |
|
|
Datamatrix Minimum |
Set the minimum bar code label length to be less than or equal to maximum label length. |
0B20 |
#define DATAMATRIX_MIN_LENGTH |
1-1500 |
1 |
1500 |
1 |
|
√ |
|
|
Datamatrix Maximum |
This feature specifies the maximum allowable length of a label. The length includes check and data characters, if applicable. Maximum Label Length should be greater than or equal to Minimum Label Length. |
0B21 |
#define DATAMATRIX_MAX_LENGTH |
1-1500 |
1 |
1500 |
1500 |
|
√ |
|
|
Datamatrix User Code ID |
Specifies the symbology identifier (if any) that is sent when parameter Send Code ID (Index 0025) is set to 3. ASCII code zero (null) is used to indicate that an identifier is not to be sent for the symbology. |
0B23 |
#define DATAMATRIX_USER_ID |
Any single ASCII character (00 = Off) |
‘V’ |
‘V’ |
‘V’ |
|
√ |
|