|
Code Parameter |
Description |
I.D.# |
C/C++ Define |
Accept. Input |
Defaults |
Scanner Type |
||||
|
Min |
Max |
Factory |
Laser |
2D Imager |
Lorax |
|||||
|
|
Enter 1 for On and 0 for Off |
|||||||||
|
Enable |
Enables/disables the Code 93 symbology. |
0400 |
#define CODE93_ENABLE |
On or Off |
Off |
On |
Off |
√ |
√ |
√ |
|
Enable Aggressive Decoding |
Enables more aggressive decoding algorithms to be used in order to scan hard to read labels. |
0401 |
#define CODE93_LEVEL |
On or Off |
Off |
On |
Off |
√ |
|
|
|
Minimum Label Length |
Set the minimum label length to be less than or equal to maximum label length. |
0420 |
#define CODE93_MIN_LENGTH |
01 - 50 |
01 |
01 |
02 |
√ |
√ |
√ |
|
Maximum Label Length |
This feature specifies the maximum allowable length of a Code 93 label. The length includes check and data characters. Maximum Label Length should be greater than or equal to Minimum Label Length. |
0421 |
#define CODE93_MAX_LENGTH |
01 - 50 |
01 |
50 |
20 |
√ |
√ |
√ |
|
Read Verification |
Sets the number of times a label must be read before it is transmitted. |
0422 |
0x0421 #define CODE93_REDUNDANCY |
01 - 04 |
01 |
02 |
01 |
√ |
√ |
|
|
User ID |
Specifies the symbology identifier (if any) that is sent when parameter Send Code ID (Index 0025) is set to 3. ASCII code zero (null) is used to indicate that an identifier is not to be sent for the symbology. |
0423 |
#define CODE93_USER_ID |
Any single ASCII character (00 = Off)
|
‘L’ |
‘L’ |
‘L’ |
√ |
√ |
√ |