|
Code Parameter |
Description |
I.D.# |
C/C++ Define |
Accept. Input |
Defaults |
Scanner Type |
||||
|
Min |
Max |
Factory |
Laser |
2D Imager |
Lorax |
|||||
|
|
Enter 1 for On and 0 for Off |
|||||||||
|
Aztec Code Enable |
Enables/disables the Aztec symbology. |
0B18 |
#define AZTEC_ENABLE |
On or Off |
Off |
On |
On |
|
√ |
|
|
Aztec Code Minimum |
Set the minimum bar code label length to be less than or equal to maximum label length. |
0B2C |
#define AZTEC_MIN_LENGTH |
1-3750 |
1 |
3750 |
1 |
|
√ |
|
|
Aztec Code Maximum |
This feature specifies the maximum allowable length of a label. The length includes check and data characters, if applicable. Maximum Label Length should be greater than or equal to Minimum Label Length. |
0B2D |
#define AZT_MAX_LENGTH |
1-3750 |
1 |
3750 |
3750 |
|
√ |
|
|
Aztec Code User ID |
Specifies the symbology identifier (if any) that is sent when parameter Send Code ID (Index 0025) is set to 3. ASCII code zero (null) is used to indicate that an identifier is not to be sent for the symbology. |
0B2F |
#define AZTEC_USER_ID |
Any single ASCII character (00 = Off) |
‘d’ |
‘d’ |
‘d’ |
|
√ |
|